Fan

This fan cover is the ideal cover for your ventilation on the boat. It prevents the penetration of water and dirt. At the same time the ventilation...

- retrofittable fan for hatches and decks- housing made of high-strength and UV-resistant composite plastic- no penetration of rain and splash wate...

Oscillating fan specially designed for marine use. With oscillating axis (90°Oscillating axis movement can be switched off, protective grille plast...

Fan for bilge and engine compartment ventilation for installation in a hose line with 75 mm inner Motor lying in the fresh air flow. Due to the spe...

Connection flange made of plastic in black. For ventilation hose with 70 and 75 mm inner /p>

The small, inexpensive solar fan from MARINCO. It can only be used as an exhaust fan and can be used in daytime operation So it does its job exactl...

Fan from VETUS with extremely low power consumption and very quiet operation. Especially for ufo fans, current consumption 9 A at 12 V. Suitable fo...

The ceiling fan from VETUS of the type UFO is reliable and easy to use, and also beautiful in design. It is not lockable and therefore provides per...

Hose nozzle with splash water protection edge. For hose Ø 75 mm. Plastic black.

Polished stainless steel. Beaded edge against risk of injury. LxWxH: 130 x 142 x 48 mm. Mounting hole Ø mm for cylinder head screws.

Deck ventilator / mushroom ventilator with white plastic cap, which can be closed from the inside. Cut-out diameter: 101 mm, deck flange 146 mm, he...

Fan cover made of polished stainless steel. Drilling Ø 5 mm (countersunk screwsDimensions: 140 x 117 x 50 mm (LxWxHWeight 150 g.

Made of stainless steel. Counter plate with fly screen, mounting hole Ø mm for countersunk screws. Dimensions (WxH): 230 x 76 mm.

Made of stainless steel. Counter plate with fly screen, mounting hole Ø mm for countersunk screws. Dimensions (WxH): 230 x 76 mm.

Electric fan with a capacity of about m³ per minute. Fully encapsulated in plastic housing. Available for 12 V connection for 75 mm ventilation ho...

SMARTVENT type 300 provides comfortable and trouble-free ventilation, drive by daylight and sunlight. Easy installation - no wiring required. Cover...

Fan made of plastic for hoses. for air hose Ø of 75 mm 70x70 mm hole stand for air hose Ø of 102 mm 90x90 mm hole stand

Easy to regulate deck vent. Closable from the inside. Installation Ø approx. 101 mm, outer Ø 200 mm. With plastic cap or stainless steel cap availa...

PVC ventilation hose with steel spiral for a temperature range of -20°C - 120°C. Max. Length: 6 m. Bending radius: Ø 75-53 mm / Ø 100-70 mm.

Fixing hole Ø mm for cylinder head screws. 75 mm hose connection. Fan box: mounting hole Ø mm for cylinder head screws. Installation depth 115 mm.

Fan: Stainless steel. Suitable for side mounting, matching the fan boxes. Mounting hole Ø mm for cylinder head screws. 75 mm hose connection.Size 1:

Wood gloss deck ventilator / mushroom ventilator made of stainless steel. Equipped with mosquito screen and plastic counter flange. Mushroom ventil...

Plastimo fan made of flexible plastic, oval. With deck ring and screw cap. Available in 3 different versions:Variants:Total height: 90 mm, total wi...

The COOL AND DRY Dorade fans from Plastimo allow continuous ventilation of the interior of the boat - the fan always remains open, both when sailin...

Fan made of flexible plastic on a Dorade box made of sturdy ABS plastic. Can be rotated 360After removing the fan, the Dorade box can be closed wat...

Water deflector for anchor locker drainage made of stainless steel. Mounting diameter: mm, for cylinder head screws. VP= 2 pcs.

Made of stainless steel. Counter rosette with fly screen, without rotating disc. Mounting holes with diameter mm for cylinder head screws.

Made of stainless steel. Counter rosette with fly screen, without rotating disc. Mounting holes with diameter mm for cylinder head screws.

Ventilation plate made of stainless steel, polished. Mounting holes Ø mm for cylinder head screws. Rainproof. Dimensions HxW.

The in-line blower provides reliable ventilation for bilge, engine room, galley and toilet room with high performance at good efficiency. Motor sha...

Gill fan made of plastic Color: white / black Dimensions (HxW): 125x140 mm / 125 x 260 mm

The MARINCO Day & Night solar fans are proven fans for day and night operation. Available in two different versions, namely a 3" model with a c...