Fittings

This straight hose connector allows you to easily link two hoses. The high-quality plastic connector is corrosion resistant.

This sturdy hose clamp is made of high quality and stainless steel (V4A) and can therefore be used just as well üabove as below deck. This makes it...

Fitting hose clamp for outer Ø: 13 mm fuel hose. Scope of delivery is 2 pieces.

Made of brass (MS58)Male thread/with collar. Available in different sizes where thread and inner hose diameter vary.

Hose nozzle made of sturdy stainless steel (A4 AISI 316/p>

Hose nozzle made of brass. Available in different sizes where thread and hose inner diameter vary.

Our exclusive awn hose clamp set is assorted with 25 stainless steel hose clamps in a clamping range from 10 to 60 mm for special needs. Supplied i...

This mixing valve is suitable for all water heaters from Isotherm from the Isotemp Basic and Slim-B series from 200/p>.

Hose nozzle, straight.

Thermostatic mixing valve from QUICK suitable for all QUICK water heaters of the Nautic B3 series.

The reducer is made of brass. Equipped with male and female thread of 1" and 3/4/p>.

The reducer made of brass is for threads with the size 3/4" and 1/2/p>

Brass hose nozzle for connecting faucets. Suitable for taps with 3/8" x 10 mm connection.

 Suitable for Plastimo plastic washbasins (awn item no:220263 u. 220265- Shape: straight - Thread: 1 1/4" - For drain hose: 28 mm

The reducing nipple is made of brass. Equipped with male and female thread of 1" and 3/4".

The brass reducing nipple has a thread of 3/4" and 1/2".

Reducer with internal/external thread made of A4 stainless steel - AISI 31Thread: 1", 3/4/p>

Pipe bend 90 ° with internal thread. Made of brass. Available in various thread sizes.

The JABSCO 2-WAY VALVE is a HELCOM compliant valve for toilet installation. Flexible installation due to rotatable hose connections. Hose connectio...

WHALE connectors for pumps made of black plastic, available as elbow at 90° angle and as Y-connector. Serves for optimal hose routing without cross...

Tank vent connector for drinking water tanks made of stainless steel, hose connection 16 mm.Technical data (see pictures):Diameter 31 mm, length 1 ...

Inflatable boat fitting for mounting a Sun Top. Made of fiberglass reinforced nylon.

Tank fittings at 90 ° angle made of brass. Various designs allow versatile applications.

Three-way ball valve with T-bore. Body in nickel-plated brass (MS58Ball made of hard chrome plated brass. With PTFE seal. Available in 5 different ...

DOMETIC PVC hose connector, with hose adapters 38 mm. PVC glue for gluing the hose adapters into PVC fittings can be purchased separately.

The three-way ball valve from Allpa has a Y-shape, which is equipped with a PTFE seal. The installed body is made of brass (MS58 nickel plated and ...

Maestrini male threaded reducing nipples are made of CR brass.

The Maestrini reducing nipple is equipped with a female and male thread. The fittings are made of CR brass and are available in different versions.

The Maestrini blindstops with external thread are made of CR brass.

The ball valve from Maestrini is made of CR brass.

The Maestrini board diffuser is made of the seawater resistant CR brass and is therefore particularly suitable for use on your boat.

The Maestrini water inlet with strainer is available in different thread sizes and made of CR brass, which is very resistant to seawater.

The tube fitting with a male and female thread is made of the corrosion-resistant brass and is therefore extremely well suited as a durable fitting...