Water Taps

The WHALE Elegance mixing set is suitable for installation on pressure or micro switch systems and can be combined with different fresh water pumps...

Single lever faucet with ceramic valves, swivel spout, attractive styling, included: spout, two connection hoses with 1/2" female thread and mounti...

Single lever faucet with pull-out hand shower from OSCULATI. 120 cm long hose. Two jet settings.

Swivel countertop faucet, chrome-plated brass. Folding 10 mm spout, 3/8" connection. Suitable for pressurized water systems.

For pumps with pressure switch. Brass chrome-plated, swiveling. With combined 10/13 mm hose connection. Suitable for pressurized water systems. Hot...

This special wrench from TRUDESIGN is suitable for mounting a 1/2" ball valve from TRUDESIGN.

The Trend A faucet made of chrome-plated plastic has a vertical swivel spout and is equipped with a micro switch. Mounting height: 40 mm. Mounting ...

Mixer tap, chrome-plated and swivel. Connection: 3/8A brass hose nozzle must be ordered separately (item no. 220281/p>.

Water tap, chrome-plated and swivel. Connection: 3/8A brass hose nozzle must be ordered separately (item no. 220281/p>.

The Trend A single-lever mixer made of chrome-plated plastic has a vertical swivel spout and is equipped with a micro switch. Mounting height: 40 m...

The drinking water spout from the brand Whale can be used for the foot or electric pumps. The spout is equipped without on/off switch. The tap is v...

Water faucet mixer modern shape made of chrome-plated brass. Suitable for pressurized water systems. 12 mm connection nozzles are included. Also av...

Thanks to the WHALE 2-way tap can be used in conjunction with a pump to reach two different rooms or connect two pumps to a common line. Must not b...

Installation single-lever mixer by BARKA with cover cap. Connections: 3/8Housing Ø:  95 mm. Ø cut-out: 57 mm. Installation depth: 150 mm. Suitable ...

This special wrench from TRUDESIGN is suitable for mounting 1 1/4" and 1 1/2" ball valves from TRUDESIGN.

This special wrench from TRUDESIGN is suitable for mounting 3/4 "and 1 "ball valves from TRUDESIGN.

Automatic faucet for pumps without pressure switch (6-24 V With integrated switch, made of chromed brass. The spout can be swiveled vertically. Inc...

Water outlet tap for pumps with pressure switch and pressurized water systems. Made of chromed brass, with vertical swivel spout and combined 10/13...

Ball valve with mounting lug for quick closing and opening. Maximum allowable pressure: PS 20 bar; material: brass.

Three-way ball valve with T-bore. Body in nickel-plated brass (MS58Ball made of hard chrome plated brass. With PTFE seal. Available in 5 different ...

The ball valves from TRUDESIGN have an internal thread on both sides and are equipped with a seacock. The valve body is made of glass fiber reinfor...

Ball valve with body in nickel-plated brass (MS58) and ball in hard chrome-plated brass. Seal made of PTFE. Available in 5 different thread sizes: ...

The ball valve with anti-freeze device is equipped with a PTFE seal. The body is made of brass MS58 nickel plated and the ball is made of hard chro...

Ball valve made of stainless steel (A4/AISI 316With PTFE seal. Available in 5 different thread sizes: 1/2", 3/4", 1", 1 1/4", 1 1/2/p>.