Water tanks

The wastewater tank gauge S from VOTRONIC is designed for accurate level measurement and is suitable for all tank materials and sizes. The fill lev...

The VOTRONIC tank gauges can be used for all tank materials and tank sizes. They provide the exact fill level of your boat. Thanks to the three-col...

For OceanTec water and fuel tank sender.

brass, finished drawn brass profile with fixed brass pin milled and drilled

For filler neck. Nickel-plated steel, with shackle opener and cap lifter.

Lid made of acetal (bayonet lock)- Can be opened or closed with a winch crank

Pury Clean from Yachticon is suitable for cleaning and disinfection of wastewater tanks and wastewater systems. Pury Clean is cleaned with the help...

Drain cock suitable for wide neck canisters with an integrated 13 mm drain cock connection in the tank bottom.

The VETUS connection set for drinking water tanks includes the following: Inspection cover, connection pipe for a 38 mm filling line, connection pi...

Filler for water made of chrome-plated brass with a cap on the chain.

If sinks and washbasins are mounted on or even below the water line, it is often difficult for the water to drain naturally. For this purpose, a se...

Simple plastic pressure compensation tank from Jabsco. 1 l capacity, maximum operating pressure 5 bar, vertical mounting, 295 mm high, diameter 90 ...

This antifreeze is a non-toxic antifreeze from Star brite, which protects against freezing of drinking water systems, toilets and heaters etc. It c...

The VOTRONIC tank transmitters for plastic or metal tanks were developed for the level measurement of water and water-containing media and thus fin...

The waste water tanks from DOMETIC are specially designed for retrofitting for self-installation. The material is polyethylene ( mm wall thicknessI...

Filler neck for water made of stainless steel. The acetal cover (bayonet lock) can be opened or closed with a winch crank. The flange diameter is 8...

Drinking water tank made of polyethylene with pump already mounted. Flojet pump has a flow rate of 12 liters per minute and is already factory moun...

These CE-approved drinking water tanks for horizontal installation are made of polyethylene and are tasteless and odorless. Very stable and insensi...

These CE-approved drinking water tanks for vertical installation are made of polyethylene and are tasteless and odorless. Very stable and insensiti...

Wide neck canister made of food grade polyethylene. The clear neck width is 88 mm. An outlet tap can be installed on the side tank bottom, which is...

Water canister made of polyethylene. With carrying handle, outlet, outlet pipe and captive screw cap. Available in 3 different sizes based on volum...

High quality tasteless and odorless plasticEasy tank cleaning through the inspection coverPlease order connection set separately!

The flexible drinking water tanks from Plastimo are a practical and reliable solution for storing drinking water on board. They are flexible, light...

A pressure equalization tank in a potable water pressure system prevents the pump from frequently turning on and off during minor pressure fluctuat...