Installation material

This deck grommet for cables allows you to run cables through the deck. When setting the mast or desired access to the cabling, the cover can be ea...

With this small awn quick connector you can connect cables and branches together on board without the need for pressing or soldering. This is espec...

The awn flat brass connector is provided with a metallic insulation support. The insulation material is made of durable PVC. So that the function a...

This isloated flat receptacle has a flared PVC insulation so that it can be easily operated. This gives it excellent resistance to heat, frost and ...

3 m track cable from Raymarine, fit for SeaTalk NG series

For coaxial cable RG 213 U: cable Ø 7 - 15 mm. Clear width 19 mm. Brass chrome plated, seawater resistant. The coax plug fits through the gland. In...

With the MC4 extension cable, you can cover longer distances between connections that belong together. With a length of 3 m, it is ideally suited f...

Scanstrut's waterproof cable grommets are manufactured to the highest quality standards. The slotted seals save you the trouble of removing the con...

Shrink tubing in black and red in 30 cm each.Provided with hot melt adhesive for professional sealing and polarity marking of the cable on tube cab...

Philippi connection for fuse holder

For all installation work on boardPlease note the necessary cable cross-sections! Temperature range -40 °C to 105 °C Price per meter 2 x mm²

For all installation work on boardPlease note the necessary cable cross-sections! Temperature range -40 °C to 105 °C Price per meter 2 x 5mm²

For all installation work on boardPlease note the necessary cable cross-sections! Temperature range -40 °C to 105 °C Price per meter 4 x mm²

For all installation work on boardPlease note the necessary cable cross-sections! Temperature range -40 °C to 105 °C Price per meter 2 x mm² / round

For all installation work on board. Please note the necessary cable cross-sections! Temperature range -40 °C to 105 °C. Price per meter. 3 x mm/p>

- Insulated ferrules for cables from to mm- 400 pieces.

The fuse holder box from BEP is suitable for 6 circuits. With screw terminals: 6 x 4 mm and 2x 5 mm. Maximum current per circuit: 30 A, total max. ...

BEP-Contour Lock System, allows mounting of multiple support points, busbars or switches as a closed unit. By the supplied insulating bar either 2-...

BEP-Contour Lock System, allows mounting of multiple support points, busbars or switches as a closed unit. Bolt diameter: 2 x 10 mm. Dimensions(LxW...

Open busbar on insulated support points from BEP made of stainless steel and brass. 12 x 4 mm screw terminals; 2 x 6 mm terminal studs. Load capaci...

For all installation work on boardPlease note the necessary cable cross-sections! Temperature range -40 °C to 105 °C Price per meter 2 x mm² flat

Circuit identifier suitable for 100 series circuit distributors, self-adhesive.

For all installation work on board. Please note the necessary cable cross-sections! Temperature range -40 °C to 105 °C. Price per meter. 3 x mm².

The SUNBEAMsystem carbon fiber Velcro strips are specially designed for TOUGH CARBON 116 W. The Quick-Fix system allows quick and easy attachment w...

Brass chrome-plated, with rubber seal. Flange Ø 32 mm. For cables up to 10 mm.

Brass chrome-plated, with rubber seal. Flange Ø 32 mm. For cables up to 6 mm.

Base plate made of aluminum, anodized matte black. With illuminated switches. Max. Current: 30 A / panel/ 10 A per circuit.

Base plate made of aluminum, anodized matte black. With illuminated switches. Max. Current: 30 A / panel / 10 A per circuit.

This connector is suitable for up to 12 cables with a cross-section of 1.5 - 2.5 mmnbsp;

The cable junction box is waterproof and equipped with a total of eight screw terminals.The dimensions are 13mm x 10mm x 5mm.

This cable connector from Minn Kota is suitable for cables with a cross-section of 4 to 16 mmIt is a snap-in locking connector, the set consists of...

philippi surface mount box for flange socket

The round socket from philippi is analogous to a cigarette lighter with cover and round mounting flange. -Required mounting hole Ø: 28 mm-Fits plug...

Space-saving USB plug for charging and operating various devices, such as laptops, notebooks, tablet PCs, cell phones and music players, via the ci...

The connector for the separation of high current lines up to max. 65 amps of E- / outboard motors, wind generators, solar panels and hydro generato...

The philippi 12V socket is a waterproof built-in standard socket with screw cover. This socket is waterproof and complies with IP 6In addition, thi...