Transducer & Sonar

Power and data cable for 60/70

The LOWRANCE Active Imaging 3-IN-1 Transducer m (6 inch cable) has the longest range and greatest detail, plus simplified target identification th...

The transom mounting kit for the ActiveTarget™ transducer allows the unit to be mounted to the transom of your vessel.

LOWRANCE skimmer transducer CRUISE/HOOK² with 83/200 kHz.

The GARMIN Airmar DST810 smart transducer for through-hull mounting provides data on water depth, speed through water and water temperature. It pro...

ME SENSE motion or acceleration sensor for the ME SENSE monitoring system.  With ME SENSE products, boat monitoring is possible from anywhere. The...

Adapter cable to connect a DSM30/300 encoder with a suitable A-Series/aSeries/cSeries/eSeries model. The length of the cable is equal to m.

Raymarine bronze breakthrough transducer B117 for water depth. Suitable for the following hull material: wood and GRP. Max. Transmitting power: 600...

The Raymarine wind sensor is equipped with a 30 meter cable. This transducer measures useful values for wind direction and wind speed.

This Raymarine breakthrough transducer is a log, plumb and temperature transducer. Airmar's Smart™ sensors have built-in microelectronics, so the s...

NASA protective cap cover for TARGET

NASA protective cap cover for CRUISER

The GPS antenna for easyTRX from Weatherdock provides raw GPS data (no NMEA) and is therefore suitable for any Class B AIS transceiver that require...

NASA log transmitter with sleeve.

NASA mast unit, complete for first generation NASA wind gauges. Can be used with all older NASA MARINE display units or as a replacement for defect...

Protective cap cover for NASA CLIPPER

The NASA extension cable for Clipper depth sounder has a length of 5 meters.

NASA replacement wind turbine for wind force for NASA CRUISER anemometer.

This is a log transducer from NASA with replacement paddlewheel

NASA replacement wind vane for anemometer.

The GT56 UHD-TM from GARMIN is an extremely versatile universal transducer that offers Ultra-HD ClearVü and SideVü as well as traditional High Wide...

For boats with wooden hulls, in steel or GRP sandwich construction, the transducer must have direct access to the water. The plastic shuttle protec...

Installation kit for NASA depth sounder transducer with short shaft in fiberglass boats up to max. 20 mm laminate thickness. No hull puncture, no d...

Suitable for all echo sounders with a transducer frequency of 150 kHz, e.g. NASA, Seafarer.

Ideal for locating areas with a high chance of fish abundance such as rock formations, standing timber, plants, ditches and slopes: Active-Imaging...

Ideal for locating areas with fish populations such as rock formations, standing timber, vegetation, ditches and slopes: Active-Imaging™ 2-in-1 so...