The OGM inflatable boat and fender cleaner Extreme is used for cleaning and removing dirt, soot, oil residues, sticky adhesions on fenders and tarpaulins as well as for removing adhesive residues from labeling films and stickers. Also graffiti from and GRP surfaces so as tree resin stains and fine paint scratches without abrasives can be removed with the cleaner.
Please note when applying the cleaner please pay attention to the correct working technique:
- For larger areas, please use a hand spray bottle or finger sprayer.
- For small areas please wet a paper towel.Cleaning process:
Depending on the pollution, the sprayed cleaner between 5 and 30 seconds to soak. Note that the sprayed surface does not dry.
For wiping the pollution use a normal paper roll / paper towel.
Before wiping ensure that the soiled surface is well moistened with cleaner. If necessary, lightly re-spray!
Now wipe with clean paper towel only 1x over the soiled area!
Now the coarsest dirt is in the paper towel, which must be disposed of.
In no case wipe with dirty cloth again over the surface, otherwise you will bring the dirt into the surface of the substrate to be cleaned.
Now thinly re-spray cleaner and immediately wipe with new clean cleaning cloth. If necessary, leave cleaner to act again in the case of eaten dirt.
When the surface is clean, cleaner can be applied again in the last operation and "polished" the surface in circular motions. It is important for both cleaning and final polishing that the surface to be cleaned is always well moistened.
As soon as the surface becomes sticky when wiped, the cleaning cloth must be moistened more or cleaner applied!
After completion, allow the cleaned surface to dry well and air out. Until completely dry, the surface may be slightly sticky.